{"id":5072,"date":"2020-12-30T08:00:00","date_gmt":"2020-12-30T00:00:00","guid":{"rendered":"http:\/\/pipingpig.com\/index.php\/2020\/12\/30\/smart3d-0055\/"},"modified":"2026-08-20T18:19:57","modified_gmt":"2026-08-20T10:19:57","slug":"smart3d-0055","status":"publish","type":"post","link":"https:\/\/www.pipingpig.com\/2020\/12\/30\/smart3d-0055\/","title":{"rendered":"\u552f\u4e00\u6807\u8bc6"},"content":{"rendered":"
\n

\u00a0<\/span><\/span><\/span><\/p>\n

A <\/span>P P E N D I X <\/span>D<\/span><\/span><\/p>\n

Appendix: Unique Key Information<\/span><\/h1>\n

This appendix lists the properties that are used to query the various types of data in a piping specification.<\/span><\/p>\n

All Code Lists<\/span><\/h2>\n

ShortDescription , CodeListNumber<\/code><\/span><\/p>\n

Example<\/span><\/p>\n

For AspectCode single level code list unique columns are:\u00a0<\/span><\/span><\/p>\n

1.<\/span><\/span>AspectCode ShortDescription<\/span><\/p>\n

2.<\/span><\/span>Codelist Number<\/span><\/p>\n

For EndPreparation 3-level code list unique columns are for each level:<\/span><\/p>\n

1.<\/span><\/span>TerminationClass ShortDescription<\/span><\/p>\n

2.<\/span><\/span>Codelist Number<\/span><\/p>\n

OR<\/span><\/p>\n

TerminationSubClass ShortDescription<\/span><\/p>\n

3.<\/span><\/span>Codelist Number<\/span><\/p>\n

OR<\/span><\/p>\n

EndPreparation ShortDescription<\/span><\/p>\n

4.<\/span><\/span>Codelist Number<\/span><\/p>\n

All Part Classes<\/span><\/h2>\n

The PipingCmdtyCtlgPartNoBasisOpt option specifies the unique key definition, or the Part<\/span><\/p>\n

Number for pipe parts delivered in the Catalog. This option is available in the<\/span><\/p>\n

DefaultProjectOptions sheet of Piping Specification.xls workbook. The default value is 5.\u00a0<\/span><\/span><\/p>\n

You can specify a value mentioned in the table below, as necessary.\u00a0<\/span><\/span><\/p>\n\n\n\n\n\n
\n

Value<\/span><\/p>\n<\/td>\n

\n

Description<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

5<\/span><\/p>\n<\/td>\n

\n

The software composes the unique key definition by concatenating the<\/span><\/p>\n

IndustryCommodityCode, ScheduleThickness[1..n], and Npd[1..n] values defined in corresponding part sheet of the Piping Catalog.xls workbook.\u00a0<\/span><\/span><\/p>\n<\/td>\n<\/tr>\n

\n

10<\/span><\/p>\n<\/td>\n

\n

The unique key definition is the corresponding CommodityCode defined in the PipingCommodityFilter sheet of Piping Specifications.xls workbook. For more information on Piping Commodity Filter, see Piping Commodity Filter (on page 26).<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/span><\/span><\/span><\/p>\n\n\n\n
\n

15<\/span><\/p>\n<\/td>\n

\n

The unique key definition is set to corresponding ClientCommodityCode defined the<\/span><\/p>\n

PipingCommodityProcurementData sheet of Piping Commodity Procurement Data.xls workbook. For more information on Piping Commodity Procurement, see Piping Commodity Procurement (on page 43).<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Example<\/span><\/p>\n

If PipingCmdtyCtlgPartNoBasisOpt option is set to 5, then the unique key definition or Part<\/span><\/p>\n

Number is composed by concatenating the IndustryCommodityCode,<\/span><\/p>\n

ScheduleThickness[1..n], and Npd[1..n] values, where n represents the port number.<\/span><\/p>\n

The unique key definition of a gate valve for an 8 inches pipe with a schedule thickness of S-140 is VABARBOAEAFPADACFZZUSS-140S-14088.<\/span><\/p>\n

\u00a0<\/span><\/span><\/p>\n

\u00a0<\/span>The PipingCmdtyCtlgPartNoBasisOpt option is dependent on<\/span><\/p>\n

CmdtyCodeDependenceOnSchedule, IndustryCommodityCodeOption, and<\/span><\/p>\n

PipingCmdtyProcurementDataOpt options in the DefaultProjectOptions sheet of Piping Specification.xls workbook. For more information, see Default Project Options Sheet (on page 103).<\/span><\/p>\n

Unique Key Information<\/span><\/h2>\n

Unique columns are listed in included in {}.<\/span><\/p>\n

Bolt Selection Filter <\/span>\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{SpecName} {NominalDiameterFrom}<\/span><\/p>\n

{NominalDiameterTo} {BoltOption}<\/span><\/p>\n

{MaximumTemperature} {EndPreparation}<\/span><\/p>\n

{PressureRating} {EndStandard}<\/span><\/p>\n

{AlternateEndPreparation}<\/span><\/p>\n

{AlternatePressureRating} {AlternateEndStandard}<\/span><\/p>\n

Bolt Selection Filter For Nozzles \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{EquipmentTagNumber} {NozzleTagnumber}<\/span><\/p>\n

{ContractorCommodityCode}<\/span><\/p>\n

{BoltingRequirements} {QuantityOfCapScrews}<\/span><\/p>\n

{CapScrewContractorCmdtyCode}<\/span><\/p>\n

{CapScrewDiameter} {TappedHoleDepth}<\/span><\/p>\n

{BoltExtensionOption}<\/span><\/p>\n

Cable Nozzle \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{PortType} {SubType} {Diameter} {Area}<\/span><\/p>\n

{Tightness}<\/span><\/p>\n

Cabletray Ports \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{NominalWidth} {NominalDepth} {ActualWidth}<\/span><\/p>\n

{ActualDepth}<\/span><\/p>\n

Cable Tray Spec \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{SpecName}<\/span><\/p>\n

Cable Way Bend Radius \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{SpecName} {BendRadius}<\/span><\/p>\n

CableWay Nominal Sizes \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{SpecName} {SectionName}<\/span><\/p>\n

Cableway Spec \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{SpecName}<\/span><\/p>\n

Calculation ProgIDs \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{DesignStandard}<\/span><\/p>\n

Cap Screw LenCalTolerance \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{BoltType} {BoltLengthFrom} {BoltLengthTo}<\/span><\/p>\n

{BoltDiameterFrom} {BoltDiameterTo}<\/span><\/p>\n

Cap Screw LenCal Tolerance Per Spec \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{SpecName} {BoltType} {BoltLengthFrom}<\/span><\/p>\n

{BoltLengthTo} {BoltDiameterFrom}<\/span><\/p>\n

{BoltDiameterTo}<\/span><\/p>\n

Clamp Selection Filter \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{SpecName} {NominalDiameterFrom}<\/span><\/p>\n

{NominalDiameterTo} {ClampOption}<\/span><\/p>\n

{EndPreparation} {EndStandard}<\/span><\/p>\n

{AlternateEndPreparation} {AlternateEndStandard}<\/span><\/p>\n

Class Node Type \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/span>{ObjectName}<\/span><\/p>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Commodity Specific Service Limits<\/span><\/p>\n<\/td>\n

\n

{IndustryCommodityCode} {FirstSize}<\/span><\/p>\n

{FirstSizeUnits} {FirstSizeSchedule} {SecondSize}<\/span><\/p>\n

{SecondSizeUnits} {SecondSizeSchedule}<\/span><\/p>\n

{MultiSizeOption}<\/span><\/p>\n

{IndustryCommodityCodeGasket}<\/span><\/p>\n

{MaximumTemperature} {MaximumPressure}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Component Insulation Exclusion<\/span><\/p>\n<\/td>\n

\n

{PipingCommodityType} {FirstSizeFrom}<\/span><\/p>\n

{FirstSizeTo} {SecondSizeFrom} {SecondSizeTo}<\/span><\/p>\n

{MultiSizeOption} {HeatTracingMedium}<\/span><\/p>\n

{InsulationTemperatureFrom}<\/span><\/p>\n

{InsulationTemperatureTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Conduit Commodity Matl Control Data<\/span><\/p>\n<\/td>\n

\n

{ContractorCommodityCode} {FirstSizeFrom}<\/span><\/p>\n

{FirstSizeTo} {FirstSizeUnits} {SecondSizeFrom}<\/span><\/p>\n

{SecondSizeTo} {SecondSizeUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Conduit Default Cmdty Slcn Rule<\/span><\/p>\n<\/td>\n

\n

{FeatureType}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Conduit Filter<\/span><\/p>\n<\/td>\n

\n

{SpecName} {ShortCode} {FirstSizeFrom}<\/span><\/p>\n

{FirstSizeTo} {FirstSizeUnits} {SecondSizeFrom}<\/span><\/p>\n

{SecondSizeTo} {SecondSizeUnits}<\/span><\/p>\n

{CommodityOption} {OptionCategory}<\/span><\/p>\n

{ContractorCommodityCode} {Comments}<\/span><\/p>\n

{BendRadius} {BendRadiusMultiplier}<\/span><\/p>\n

{SelectionBasis}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Conduit Nominal Diameters<\/span><\/p>\n<\/td>\n

\n

{SpecName} {Npd} {NpdUnitType}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Conduit Ports<\/span><\/p>\n<\/td>\n

\n

{Npd} {NpdUnitType} {EndPreparation}<\/span><\/p>\n

{ScheduleThickness} {EndStandard}<\/span><\/p>\n

{PressureRating} {FlowDirection}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Conduit Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Corrosion Allowance<\/span><\/p>\n<\/td>\n

\n

{SpecName} {MaterialsCategory} {CorrosionAllowance}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Default Change Of Direction<\/span><\/p>\n<\/td>\n

\n

{BendAngleFrom} {BendAngleTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Default Change Of Direction Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {BendAngleFrom} {BendAngleTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Default Commodity Selection Rule<\/span><\/p>\n<\/td>\n

\n

{FeatureType}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

DIN Wall Thickness Data<\/span><\/p>\n<\/td>\n

\n

{FirstSize} {FirstSizeUnits} {SecondSize}<\/span><\/p>\n

{SecondSizeUnits} {MultiSizeOption}<\/span><\/p>\n

{GeometricIndustryStandard} {FirstSizeSchedule}<\/span><\/p>\n

{SecondSizeSchedule}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

End Prep Compatibility Exceptions Rule<\/span><\/p>\n<\/td>\n

\n

{EndPreparationEndA} {EndStandardEndA}<\/span><\/p>\n

{MaterialsCategoryEndA} {EndPreparationEndB}<\/span><\/p>\n

{EndStandardEndB} {MaterialsCategoryEndB}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Field Fit Length<\/span><\/p>\n<\/td>\n

\n

{WeldType} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{ConstructionRequirementEnd1}<\/span><\/p>\n

{ConstructionRequirementEnd2} {FieldFitLength}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Field Fit Length Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {WeldType}<\/span><\/p>\n

{NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{ConstructionRequirementEnd1}<\/span><\/p>\n

{ConstructionRequirementEnd2} {FieldFitLength}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Field Lining Thickness<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Flared Pipe<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{ScheduleThickness}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Flared Pipe Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{ScheduleThickness}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Flexible Hose Assembly Rule<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits} {TopologyType}<\/span><\/p>\n

{AssemblyTag} {AssemblyOption}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Fluid Density Rule<\/span><\/p>\n<\/td>\n

\n

{FluidCode} {TemperatureFrom} {TemperatureTo} {Density}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Gasket Commodity Code Substitution Rule<\/span><\/p>\n<\/td>\n

\n

{IndustryCommodityCode} {RingNumber}<\/span><\/p>\n

{NominalDiameterFrom} {NominalDiameterTo}<\/span><\/p>\n

{NominalDiameter} {NpdUnitType}<\/span><\/p>\n

{GasketIndustryStandard}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Gasket Part Data<\/span><\/p>\n<\/td>\n

\n

{IndustryCommodityCode} {RingNumber}<\/span><\/p>\n

{NominalDiameterFrom} {NominalDiameterTo}<\/span><\/p>\n

{NominalDiameter} {NpdUnitType}<\/span><\/p>\n

{GasketIndustryStandard}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Gasket Selection Filter<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalDiameterFrom} {NominalDiameterTo} {GasketOption}<\/span><\/p>\n

{MaximumTemperature} {EndPreparation}<\/span><\/p>\n

{PressureRating} {EndStandard}<\/span><\/p>\n

{AlternateEndPreparation}<\/span><\/p>\n

{AlternatePressureRating} {AlternateEndStandard}<\/span><\/p>\n

{FluidCode} {ScheduleThickness}<\/span><\/p>\n

{MinimumTemperature}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Gasket Selection Filter For Nozzles<\/span><\/p>\n<\/td>\n

\n

{EquipmentTagNumber} {NozzleTagNumber}<\/span><\/p>\n

{ContractorCommodityCode}<\/span><\/p>\n

{GasketRequirements} {RingNumber}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Hanger Class Node<\/span><\/p>\n<\/td>\n

\n

{ObjectName}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

IFC Clearance Rule<\/span><\/p>\n<\/td>\n

\n

{RuleName} {ObjectType1} {Aspect1}<\/span><\/p>\n

{ObjectType2} {Aspect2}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

IFC Post Processor Rule<\/span><\/p>\n<\/td>\n

\n

{RuleName}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Inside Surface Treatment<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits} {FluidCode}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Instrument Class Data<\/span><\/p>\n<\/td>\n

\n

{TagNumber} {GenericTagNumber}<\/span><\/p>\n

{FirstSizeFrom} {FirstSizeTo} {FirstSizeUnits}<\/span><\/p>\n

{SecondSizeFrom} {SecondSizeTo}<\/span><\/p>\n

{SecondSizeUnits} {MultiSizeOption}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Insulation Thickness Table<\/span><\/p>\n<\/td>\n

\n

{SpecName} {Npd_Lo} {Npd_Hi} {Temperature_Lo}<\/span><\/p>\n

{Temperature_Hi}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Jacket Closure<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{JacketClosureMethod}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Joint Quality Factor<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalDiameterFrom}<\/span><\/p>\n

{NominalDiameterTo} {NpdUnitType}<\/span><\/p>\n

{CommodityOption}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Lined Connector Selection Filter<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalDiameterFrom}<\/span><\/p>\n

{NominalDiameterTo} {NpdUnitType}<\/span><\/p>\n

{MaximumTemperature} {EndPreparation}<\/span><\/p>\n

{PressureRating} {EndStandard}<\/span><\/p>\n

{AlternateEndPreparation}<\/span><\/p>\n

{AlternatePressureRating} {AlternateEndStandard}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Liner Thickness Data<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter} {NominalDiameterUnits} {LiningMaterial} {GeometricIndustryStandard}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Mach Bolt Len Cal Tolerance<\/span><\/p>\n<\/td>\n

\n

{BoltType} {BoltLengthFrom} {BoltLengthTo} {BoltDiameterFrom} {BoltDiameterTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Mach Bolt Len Cal Tolerance Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {BoltType} {BoltLengthFrom}<\/span><\/p>\n

{BoltLengthTo} {BoltDiameterFrom}<\/span><\/p>\n

{BoltDiameterTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Materials Data<\/span><\/p>\n<\/td>\n

\n

{DesignStandard} {MaterialsGrade} {Temperature}<\/span><\/p>\n

{WallThicknessFrom} {WallThicknessTo}<\/span><\/p>\n

{CoefficientY} {AllowableStress} {MillTolerance}<\/span><\/p>\n

{MillTolerancePercentage}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Mating Ports<\/span><\/p>\n<\/td>\n

\n

{EndPrep1} {EndPrep2}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

MechJointAllowPipeEndSeparation<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{GeometricIndustryStandard}<\/span><\/p>\n

{GeometricIndustryPractice}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Minimum Duct Thickness<\/span><\/p>\n<\/td>\n

\n

{SpecName} {CrosssectionSizeFrom} {CrosssectionSizeTo} {MaterialType}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Minimum Pipe Length Rule<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Minimum Pipe Length Rule Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {Npd} {NpdUnitType}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Min Pipe Length Purchase<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter} {PurchaseLength}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Min Pipe Length Purchase Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameter} {PurchaseLength}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Multiport Valve Operator Data<\/span><\/p>\n<\/td>\n

\n

{ContractorCommodityCode} {PortNumber}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

NPD Compatibility Exceptions Rule<\/span><\/p>\n<\/td>\n

\n

{NPD1} {NPD1Units} {MaterialsGrade1}<\/span><\/p>\n

{EndStandard1} {NPD2} {NPD2Units}<\/span><\/p>\n

{MaterialsGrade2} {EndStandard2}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

NPD Equivalence<\/span><\/p>\n<\/td>\n

\n

{NPDInPrimaryUnitsOfMeasure}<\/span><\/p>\n

{PrimaryUnitsOfMeasure}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Nut Commodity Code Substitution Rule<\/span><\/p>\n<\/td>\n

\n

{ContractorCommodityCode} {BoltDiameter}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Nut Part Data<\/span><\/p>\n<\/td>\n

\n

{IndustryCommodityCode}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n
\n

Nut Selection Filter<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NutOption} {MaximumTemperature} {BoltType} {BoltDiameter} {PressureRating}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Outside Surface Treatment<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{EnvironmentalZone}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Permissible Duct Thickness<\/span><\/p>\n<\/td>\n

\n

{MaterialType} {MaterialGrade} {PermissibleDuctThickness}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Permissible Duct Thickness per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {MaterialType} {MaterialGrade} {PermissibleDuctThickness}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Permissible Jacket And Jumper Sizes<\/span><\/p>\n<\/td>\n

\n

{SpecName} {CoreNominalPipeDiameter}<\/span><\/p>\n

{CoreNominalPipeDiameterUnits}<\/span><\/p>\n

{JacketNominalPipeDiameter}<\/span><\/p>\n

{JacketNominalPipeDiameterUnits}<\/span><\/p>\n

{JumperNominalPipeDiameter}<\/span><\/p>\n

{JumperNominalPipeDiameterUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Permissible Jacket Size Exceptions<\/span><\/p>\n<\/td>\n

\n

{SpecName} {CoreNominalPipeDiameter}<\/span><\/p>\n

{CoreNominalPipeDiameterUnits}<\/span><\/p>\n

{JacketNominalPipeDiameter}<\/span><\/p>\n

{JacketNominalPipeDiameterUnits} {ShortCode}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Permissible Pipe Bending Machine<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUOM}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Permissible Taps<\/span><\/p>\n<\/td>\n

\n

{SpecName} {PermissibleTapNumber}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n
\n

Pipe Bending Configuration Data<\/span><\/p>\n<\/td>\n

\n

{IsBendPlanar} {NominalBendAngleFrom1}<\/span><\/p>\n

{NominalBendAngleTo1}<\/span><\/p>\n

{NonPlanarRotationAngleFrom2}<\/span><\/p>\n

{NonPlanarRotationAngleTo2}<\/span><\/p>\n

{NominalBendAngleFrom2}<\/span><\/p>\n

{NominalBendAngleTo2}<\/span><\/p>\n

{NonPlanarRotationAngleFrom3}<\/span><\/p>\n

{NonPlanarRotationAngleTo3}<\/span><\/p>\n

{NominalBendAngleFrom3}<\/span><\/p>\n

{NominalBendAngleTo3}<\/span><\/p>\n

{NonPlanarRotationAngleFrom4}<\/span><\/p>\n

{NonPlanarRotationAngleTo4}<\/span><\/p>\n

{NominalBendAngleFrom4}<\/span><\/p>\n

{NominalBendAngleTo4}<\/span><\/p>\n

{NonPlanarRotationAngleFrom5}<\/span><\/p>\n

{NonPlanarRotationAngleTo5}<\/span><\/p>\n

{NominalBendAngleFrom5}<\/span><\/p>\n

{NominalBendAngleTo5}<\/span><\/p>\n

{NonPlanarRotationAngleFrom6}<\/span><\/p>\n

{NonPlanarRotationAngleTo6}<\/span><\/p>\n

{NominalBendAngleFrom6}<\/span><\/p>\n

{NominalBendAngleTo6}<\/span><\/p>\n

{NonPlanarRotationAngleFrom7}<\/span><\/p>\n

{NonPlanarRotationAngleTo7}<\/span><\/p>\n

{NominalBendAngleFrom7}<\/span><\/p>\n

{NominalBendAngleTo7}<\/span><\/p>\n

{NonPlanarRotationAngleFrom8}<\/span><\/p>\n

{NonPlanarRotationAngleTo8}<\/span><\/p>\n

{NominalBendAngleFrom8}<\/span><\/p>\n

{NominalBendAngleTo8}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Bending Die Data<\/span><\/p>\n<\/td>\n

\n

{PipeBendingMachineName}<\/span><\/p>\n

{NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUOM}<\/span><\/p>\n

{PipeBendRadiusMultiplier}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Bending Elongation<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUnits} {PipeBendRadius} {BendAngle}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Bending Elongation Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUnits} {PipeBendRadius} {BendAngle}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Bending Machine Data<\/span><\/p>\n<\/td>\n

\n

{PipeBendingMachineName}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Pipe Bending Min Tangent Len Data<\/span><\/p>\n<\/td>\n

\n

{PipeBendingMachineName} {PipeBendType}<\/span><\/p>\n

{MinBendToBendTanLenOption}<\/span><\/p>\n

{NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUOM}<\/span><\/p>\n

{PipeBendRadiusMultiplier}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Branch<\/span><\/p>\n<\/td>\n

\n

{SpecName} {HeaderSize} {HdrSizeNpdUnitType} {BranchSize} {BrSizeNpdUnitType} {AngleLow} {AngleHigh}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Branch Fabrication Rule<\/span><\/p>\n<\/td>\n

\n

{SpecName} {HeaderSize} {HeaderSizeUnits}<\/span><\/p>\n

{BranchSize} {BranchSizeUnits} {AngleLow}<\/span><\/p>\n

{AngleHigh} {BranchReinforcementType}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Branch For Jackets<\/span><\/p>\n<\/td>\n

\n

{SpecName} {HeaderSize} {HdrSizeNpdUnitType} {BranchSize} {BrSizeNpdUnitType} {AngleLow} {AngleHigh}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Mfg Map Symbol<\/span><\/p>\n<\/td>\n

\n

{PartClassName} {SKEY} {CodeList}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Mfg Rules<\/span><\/p>\n<\/td>\n

\n

{IsoNames}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Mfg Spool Rule<\/span><\/p>\n<\/td>\n

\n

{Name}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Nominal Diameters<\/span><\/p>\n<\/td>\n

\n

{SpecName} {Npd} {NpdUnitType}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Part Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {FirstSizeFrom} {FirstSizeTo}<\/span><\/p>\n

{FirstSizeUnits} {SecondSizeFrom}<\/span><\/p>\n

{SecondSizeTo} {SecondSizeUnits} {ShortCode}<\/span><\/p>\n

{OptionCode} {MultisizeOption}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Schedule Thickness<\/span><\/p>\n<\/td>\n

\n

{Npd} {NpdUnitType} {Schedule} {Thickness}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Pipe Takedown Parts<\/span><\/p>\n<\/td>\n

\n

{SpecName} {Npd} {NpdUnitType}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Commodity Filter<\/span><\/p>\n<\/td>\n

\n

{SpecName} {FirstSizeFrom} {FirstSizeTo}<\/span><\/p>\n

{FirstSizeUnits} {SecondSizeFrom}<\/span><\/p>\n

{SecondSizeTo} {SecondSizeUnits} {ShortCode} {OptionCode} {MultisizeOption}<\/span><\/p>\n

{MaximumTemperature} {MinimumTemperature} {SelectionBasis}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Commodity Matl Control Data<\/span><\/p>\n<\/td>\n

\n

{ContractorCommodityCode} {FirstSizeFrom}<\/span><\/p>\n

{FirstSizeTo} {FirstSizeUnits} {SecondSizeFrom}<\/span><\/p>\n

{SecondSizeTo} {SecondSizeUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Piping Commodity Procurement Data<\/span><\/p>\n<\/td>\n

\n

{CommodityCode} {FirstSize} {FirstSizeUnits}<\/span><\/p>\n

{SecondSize} {SecondSizeUnits} {MultisizeOption}<\/span><\/p>\n

{FirstSizeSchedule} {SecondSizeSchedule}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Elbow Nozzles<\/span><\/p>\n<\/td>\n

\n

{Npd} {NpdUnitType} {EndPreparation}<\/span><\/p>\n

{ScheduleThickness} {EndStandard}<\/span><\/p>\n

{PressureRating} {FlowDirection} {BendRadius} {BendLength}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Generic Data Bolted<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter} {NominalDiameterUnits}<\/span><\/p>\n

{EndPreparation} {EndStandard} {PressureRating}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Generic Data Female<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter} {NominalDiameterUnits}<\/span><\/p>\n

{EndPreparation} {EndStandard} {PressureRating} {Schedule}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Generic Data Mechanical<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter} {NominalDiameterUnits}<\/span><\/p>\n

{EndPreparation} {EndStandard} {PressureRating}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Materials Class Data<\/span><\/p>\n<\/td>\n

\n

{SpecName}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Specialty Class Data<\/span><\/p>\n<\/td>\n

\n

{TagNumber} {GenericTagNumber}<\/span><\/p>\n

{FirstSizeFrom} {FirstSizeTo} {FirstSizeUnits}<\/span><\/p>\n

{SecondSizeFrom} {SecondSizeTo}<\/span><\/p>\n

{SecondSizeUnits} {MultiSizeOption}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Piping Straight Nozzles<\/span><\/p>\n<\/td>\n

\n

{Npd} {NpdUnitType} {EndPreparation}<\/span><\/p>\n

{ScheduleThickness} {EndStandard}<\/span><\/p>\n

{PressureRating} {FlowDirection}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Plain Piping Generic Data<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter} {NominalDiameterUnits} {EndStandard} {Schedule} {PressureRating}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Plate Flange Setback Distance<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Port Alignment<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits} {EndPreparation}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Port Alignment Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits} {EndPreparation}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n
\n

Preferred Cap Screw Length<\/span><\/p>\n<\/td>\n

\n

{BoltType} {BoltDiameterFrom} {BoltDiameterTo}<\/span><\/p>\n

{BoltDiameterIncrement} {MaterialsGrade}<\/span><\/p>\n

{PreferredBoltLengthFrom}<\/span><\/p>\n

{PreferredBoltLengthTo}<\/span><\/p>\n

{PreferredBoltLengthIncrement}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Preferred Cap Screw Length Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {BoltType} {BoltDiameterFrom}<\/span><\/p>\n

{BoltDiameterTo} {BoltDiameterIncrement}<\/span><\/p>\n

{MaterialsGrade} {PreferredBoltLengthFrom}<\/span><\/p>\n

{PreferredBoltLengthTo}<\/span><\/p>\n

{PreferredBoltLengthIncrement}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Preferred Mach Bolt Length<\/span><\/p>\n<\/td>\n

\n

{BoltType} {BoltDiameterFrom} {BoltDiameterTo}<\/span><\/p>\n

{BoltDiameterIncrement} {MaterialsGrade}<\/span><\/p>\n

{PreferredBoltLengthFrom}<\/span><\/p>\n

{PreferredBoltLengthTo}<\/span><\/p>\n

{PreferredBoltLengthIncrement}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Preferred Mach Bolt Length Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {BoltType} {BoltDiameterFrom}<\/span><\/p>\n

{BoltDiameterTo} {BoltDiameterIncrement}<\/span><\/p>\n

{MaterialsGrade} {PreferredBoltLengthFrom}<\/span><\/p>\n

{PreferredBoltLengthTo}<\/span><\/p>\n

{PreferredBoltLengthIncrement}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Preferred Stud Bolt Length<\/span><\/p>\n<\/td>\n

\n

{BoltType} {BoltDiameterFrom} {BoltDiameterTo}<\/span><\/p>\n

{BoltDiameterIncrement} {MaterialsGrade}<\/span><\/p>\n

{PreferredBoltLengthFrom}<\/span><\/p>\n

{PreferredBoltLengthTo}<\/span><\/p>\n

{PreferredBoltLengthIncrement}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Preferred Stud Bolt Length Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {BoltType} {BoltDiameterFrom}<\/span><\/p>\n

{BoltDiameterTo} {BoltDiameterIncrement}<\/span><\/p>\n

{MaterialsGrade} {PreferredBoltLengthFrom}<\/span><\/p>\n

{PreferredBoltLengthTo}<\/span><\/p>\n

{PreferredBoltLengthIncrement}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

PreferredTapEndStudBoltLength<\/span><\/p>\n<\/td>\n

\n

{BoltType} {BoltDiameterFrom} {BoltDiameterTo}<\/span><\/p>\n

{BoltDiameterIncrement} {MaterialsGrade}<\/span><\/p>\n

{PreferredBoltLengthFrom}<\/span><\/p>\n

{PreferredBoltLengthTo}<\/span><\/p>\n

{PreferredBoltLengthIncrement}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

PrefTapEndStudBoltLengthPerSpec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {BoltType} {BoltDiameterFrom}<\/span><\/p>\n

{BoltDiameterTo} {BoltDiameterIncrement}<\/span><\/p>\n

{MaterialsGrade} {PreferredBoltLengthFrom}<\/span><\/p>\n

{PreferredBoltLengthTo}<\/span><\/p>\n

{PreferredBoltLengthIncrement}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Reference Standard<\/span><\/p>\n<\/td>\n

\n

{Name}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Reinforcing Pad Data<\/span><\/p>\n<\/td>\n

\n

{SpecName} {HeaderSize}<\/span><\/p>\n

{HeaderSizeUnitsOfMeasure} {BranchSize}<\/span><\/p>\n

{BranchSizeUnitsOfMeasure}<\/span><\/p>\n

{AcuteBranchAngleFrom} {AcuteBranchAngleTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Reinforcing Weld Data<\/span><\/p>\n<\/td>\n

\n

{SpecName} {HeaderSize}<\/span><\/p>\n

{HeaderSizeUnitsOfMeasure} {BranchSize}<\/span><\/p>\n

{BranchSizeUnitsOfMeasure}<\/span><\/p>\n

{AcuteBranchAngleFrom} {AcuteBranchAngleTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Report<\/span><\/p>\n<\/td>\n

\n

{Name}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Rootgap<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Rootgap Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Service Limits<\/span><\/p>\n<\/td>\n

\n

{SpecName} {Temperature} {Pressure}<\/span><\/p>\n

{NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Service Limits For Jackets<\/span><\/p>\n<\/td>\n

\n

{SpecName} {Temperature} {Pressure}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Short Code Hierarchy Rule<\/span><\/p>\n<\/td>\n

\n

{ShortCodeHierarchyType} {ShortCode}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Size Reduction<\/span><\/p>\n<\/td>\n

\n

{SizeReductionType} {FirstSize} {FirstSizeUnits}<\/span><\/p>\n

{SecondSize} {SecondSizeUnits}<\/span><\/p>\n

{SizeReductionPreference}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Size Reduction Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {SizeReductionType} {FirstSize}<\/span><\/p>\n

{FirstSizeUnits} {SecondSize} {SecondSizeUnits}<\/span><\/p>\n

{SizeReductionPreference}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Slip On Flange Setback Distance<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{CompanyPracticeGap}<\/span><\/p>\n

{CompanyPracticeRoundOffFactor} {EndStandard}<\/span><\/p>\n

{MaximumWeldThickness}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Socket Offset Rule<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter} {NominalDiameterUnits}<\/span><\/p>\n

{EndPreparation} {EndStandard} {PressureRating} {Schedule}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Space Group<\/span><\/p>\n<\/td>\n

\n

{ObjectName}<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


<\/span><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Standard Notes Data<\/span><\/p>\n<\/td>\n

\n

{Name} {Purpose}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Stud Bolt Len Cal Tolerance<\/span><\/p>\n<\/td>\n

\n

{BoltType} {BoltLengthFrom} {BoltLengthTo}<\/span><\/p>\n

{BoltDiameterFrom} {BoltDiameterTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Stud Bolt Len Cal Tolerance Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {BoltType} {BoltLengthFrom}<\/span><\/p>\n

{BoltLengthTo} {BoltDiameterFrom}<\/span><\/p>\n

{BoltDiameterTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Swaged Jacket Pipe Rule<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUnits} {Schedule}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Swaged Jacket Pipe Rule Per Spec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUnits} {Schedule}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

TapEndStudBoltLenCalTol<\/span><\/p>\n<\/td>\n

\n

{BoltType} {BoltLengthFrom} {BoltLengthTo} {BoltDiameterFrom} {BoltDiameterTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

TapEndStudBoltLenCalTolPerSpec<\/span><\/p>\n<\/td>\n

\n

{SpecName} {BoltType} {BoltLengthFrom}<\/span><\/p>\n

{BoltLengthTo} {BoltDiameterFrom}<\/span><\/p>\n

{BoltDiameterTo}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Tap Properties<\/span><\/p>\n<\/td>\n

\n

{TapNumber}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Thickness Data Rule<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameter}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n

{ScheduleThickness}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Valve Operator Matl Control Data<\/span><\/p>\n<\/td>\n

\n

{OperatorPartNumber}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Washer Commodity Code Substitution Rule<\/span><\/p>\n<\/td>\n

\n

{ContractorCommodityCode} {BoltDiameter}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Washer Part Data<\/span><\/p>\n<\/td>\n

\n

{IndustryCommodityCode}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Washer Selection Filter<\/span><\/p>\n<\/td>\n

\n

{SpecName} {WasherOption}<\/span><\/p>\n

{MaximumTemperature} {BoltDiameter}<\/span><\/p>\n

{PressureRating}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Weld Clearance Rule<\/span><\/p>\n<\/td>\n

\n

{SpecName} {NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits} {WeldClass}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Weld Gap Rule<\/span><\/p>\n<\/td>\n

\n

{SpecName} {WeldType}<\/span><\/p>\n

{NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits}<\/span><\/p>\n<\/td>\n<\/tr>\n

\n

Weld Model Representation Rule<\/span><\/p>\n<\/td>\n

\n

{NominalPipingDiameterFrom}<\/span><\/p>\n

{NominalPipingDiameterTo}<\/span><\/p>\n

{NominalPipingDiameterUnits} {WeldClass}<\/span><\/p>\n<\/td>\n

\n

\u00a0<\/p>\n<\/td>\n<\/tr>\n

\n

Weld Type Rule<\/span><\/p>\n<\/td>\n

\n

{FabricationTypeOfEnd1}<\/span><\/p>\n

{ConstructionRequirementOfEnd1} {FabricationTypeOfEnd2}<\/span><\/p>\n

{ConstructionRequirementOfEnd2}<\/span><\/p>\n<\/td>\n

\n

\u00a0<\/p>\n<\/td>\n<\/tr>\n

<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/span><\/span><\/p>\n

\u00a0<\/span><\/span><\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

\u00a0 A P P E N D I X D Appendix: Unique Key Information Th […]<\/p>\n","protected":false},"author":1,"featured_media":5071,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":""},"categories":[9,11],"tags":[],"class_list":["post-5072","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-smart3d","category-11"],"_links":{"self":[{"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/posts\/5072","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/comments?post=5072"}],"version-history":[{"count":3,"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/posts\/5072\/revisions"}],"predecessor-version":[{"id":7993,"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/posts\/5072\/revisions\/7993"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/media\/5071"}],"wp:attachment":[{"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/media?parent=5072"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/categories?post=5072"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.pipingpig.com\/wp-json\/wp\/v2\/tags?post=5072"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}